The macosxhints Forums
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

The macosxhints Forums (http://hintsforums.macworld.com/index.php)
-   Hardware and Peripherals (http://hintsforums.macworld.com/forumdisplay.php?f=21)
-   -   Error burning disk (http://hintsforums.macworld.com/showthread.php?t=45310)

Raven 03-19-2006 01:20 PM
I didn't think of updating this thread, but for some reason since 10.4.5 (and I had also disabled Norton AV) I can burn dvd's normally at fulll speed.
Still can't figure out what the issue was but guessing something got changed with 10.4.5 that fixed the issue. Maybe it replaced a file that had previously been modified by NAV and it replaced it with a fresh new non.modded file... But that's just speculation.

skiar 09-19-2007 11:13 AM
error 49168
 
I've localized the problem down to Symantec's SafeZones feature in SAV.
This feature can be disabled in my case using the Syamntec Auto Protect preference pane. Click on the SafeZones tab and choose Nowhere.

I was getting that error when trying to create large (>10GB) image files using Disk Utility and hdiutil from the command line.

This feature has been causing other problems in our Enterprise environment for quite a few years...

Mac OS X 10.4.10
G5 Dual 2.3Ghz
1.5GB RAM

6chrishints6 10-14-2007 07:43 PM
Error 49168
 
Raven,
I just received exactly the same error when trying to create a disk image of folder using disk utility.
I can create this error with regularity by trying to create a Disk Image of my iPhoto Library in order to create a b/u from a external hard disk to my boot drive.
I am trying to do a Disk Utility FILE/NEW/DISK IMAGE FROM FOLDER.
The error I receive back is "Unable to create iPhoto Library - error 49168"
The log shows the following:
Creating Image “Image iPhoto Library.dmg”
Initializing...
Creating...
Copying...
Finishing...
Unable to create “iPhoto Library” - error 49168.

In your case it has nothing to do with the CD, drive etc that I can tell.

Puzzled

:confused:


Quote:
Originally Posted by Raven (Post 236837)
I just got a very strange error while trying to burn a data DVD. I'm on 10.4.2 on a PB 15 ich. I put the dvd in, pops up on the desktop normally. I set the name for the cd then drag over the folders I want to burn. Click on burn, verifies data and all. Then it starts to burn and at one point ejects the cd and gives me the following error:

Burning Disk Failed because communication to the disc drive failed. (Error code 0x80020022)
Its the first time I've seem this one. I've had no problems burning in the past (has been about amonth since last time)

Here is the DiskRecording log of this:




I tried to create an image of the folders, so went to disk utility, create image from disk, choose to have it as a CD/DVD master chosoe the folder, gave a name for the image, then clicked to create it. It starts and goes almost until the end and suddenly stops stating "Error 49168" with not much explanation.
I've ssearched the forums here and even google but haven't come up with anything conclusive.
Here is the Disk Utility log for it:



Neither error logs give much explanation on what happened.
I've already repaired permissions just to make sure that that wasn't the issue: same problem in both cases.

Any one have an idea on this ?


All times are GMT -5. The time now is 07:56 AM.
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Site design © IDG Consumer & SMB; individuals retain copyright of their postings
but consent to the possible use of their material in other areas of IDG Consumer & SMB.