The macosxhints Forums - Applications "broken" by Mac OS X 10.3

The macosxhints Forums (http://hintsforums.macworld.com/index.php)

- Applications (http://hintsforums.macworld.com/forumdisplay.php?f=5)

- - Applications "broken" by Mac OS X 10.3 (http://hintsforums.macworld.com/showthread.php?t=16361)

Microsoft Word 8.0 (as part of Office 98) does not run under Classic since the 10.3.4 update. It crashes itself and Classic on launch. It will run while booted into 9.2.2 however.

Quote:

Originally Posted by Norm Nager

As you, I did an erase-and-clean install. But the version of Toast I installed was from the 5.2.1 updater. I then ran Repair Permissions before launching Toast. No problem using Toast on my 733-mhz G4 with 10.3.1 or 10.3 earler.

Respectfully, Norm

After installing the 10.3.4 update Toast 5.2.1 multi-session burning doesn't work on my Xpostfacto Beige G3 with a Yamaha SCSI burner. Toast lets you select multi but after the disk is burned it says no more burns . Toast however still works fine on my G4 with thr built in IDE burner.

Corel Photo Paint 11 craps out in Panther

Quote:

Originally Posted by Semmelrocc

Corel Photo Paint 11 as part of my Graphics Suite 11 does not start any more. It quits after showing the info-window during startup. The system doesn't even pop up an error message. All other applications of the graphics suite work well.
Has anybody else experienced this problem? Probably I am the only Mac user having CorelDraw installed on his computer (shame on me :D )...
Installation of GS-Servicepack 1 did not help...

I have had exactly the same problem with my IBook once I installed Panther on it. Previously with Jaguar there was no difficulty with Photo Paint 11. Does anyone know how to contact Corel on this?

Hi John, I replied to the post you quoted a bit further down the page, I've quoted my reply to save me retyping it:-

Quote:

Originally Posted by robarmo

Just read this on MacFixit:

"Corel PhotoPaint: Some users have reported problems starting up Corel PhotoPaint and some other Corel applications after upgrading to Mac OS X 10.3. In some cases, this issue can be resolved by holding down the "Shift" key during application launch. You will then be presented with a dialog box that asks:

"Overwrite the current workspace with the factory default?"

Clicking yes will result in loss of any custom workspaces, but has resolved the issue for some readers."

I personally haven't taken the plunge Panther wise, so can't validate the above solution, but it might prove useful for those that have.

Rob.

Since then I have upgraded to Panther, and although I only use CorelDraw 11, I've just started up Photo-Paint 11 to double-check and it worked no problem.

I reinstalled the whole Graphics Suite after a clean install of Panther.

Hope that helps.

Rob.

Quote:

Originally Posted by Semmelrocc

OK. I found the answer on Corel's site as follows:-
To correct this issue, do the following to delete the preferences: 1. Double click on the Macintosh harddrive 2. Go to the Users folder | Username | Library | Preferences 3. Trash the CorelGraphics 11 folder 4. Trash the file com.corel.PHOTO-PAINT.plist 5. Launch PHOTO-PAINT 11

iView Media Pro 1.5 no longer deletes files after uploading

As far as I can tell, this is the only part of the application that no longer works under Panther. After upgrading IVMP to 2.5, post-uploading deletion worked again. Hooray!

iChat Not Responding!!!Please Help

I am currently using OS v.10.3.4 and have iChat 2.1. When I click the app to start, it gets stuck and does nothing at all. When I click on iChat in the dock it tells me "application not responding". I tried downloading the newest iChat AV from the apple site and when I try to install it, it tells me that it can not be installed on this machine!?

I'm not sure why this is happening but I'm hoping someone out there can help me!!!! Please!

I also get the same "application not responding" with Safari when I try typing something anywhere inside the browser. Is there a link here? :confused:

Quote:

Originally Posted by MacAddict

... when I try to install it, it tells me that it can not be installed on this machine!?

What machine you got?

I'm on a G4 400mhz 384 mb SDRAM

Quote:

Originally Posted by MacAddict

I don't really think this is a "broken by Panther" issue. I'm sure there are thousands of other people with 10.3 on 400mHz G4s who have no problems with iChat.

Safari is crashing constantly after my upgrade to Panther.

It was working fine prior to the upgrade. HELP!!!

Date/Time: 2004-08-15 09:52:43 -0700
OS Version: 10.3.5 (Build 7M34)
Report Version: 2

Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Version: 1.2 (125)
PID: 838
Thread: 0

Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000020

Thread 0 Crashed:
0 libobjc.A.dylib 0x908311ec objc_msgSend + 0xc
1 com.li.hao.saft 0x005f296c _dyld_func_lookup + 0x1c74
2 com.li.hao.saft 0x005f387c _dyld_func_lookup + 0x2b84
3 libobjc.A.dylib 0x90834020 _objc_call_loads_for_image + 0xc0
4 dyld 0x8fe184b4 call_funcs_for_add_image + 0x8c
5 dyld 0x8fe183ec call_registered_funcs_for_add_images_in_objects + 0x68
6 dyld 0x8fe1830c call_registered_funcs_for_add_images + 0x1c
7 dyld 0x8fe116cc link_in_need_modules + 0x19c
8 dyld 0x8fe1333c _dyld_link_module + 0x234
9 libSystem.B.dylib 0x9003f4a8 NSLinkModule + 0x68
10 libobjc.A.dylib 0x90838068 objc_loadModule + 0x88
11 com.apple.Foundation 0x90a56e74 _NSBundleLoadCode + 0x344
12 com.apple.Foundation 0x90a56800 -[NSBundle load] + 0x134
13 net.culater.SIMBL 0x005cabec +[SIMBL loadBundle:forApplicationIdentifier:] + 0x1bc (SIMBL.m:85)
14 net.culater.SIMBL 0x005ca9d8 +[SIMBL load] + 0x10c (SIMBL.m:33)
15 libobjc.A.dylib 0x90834020 _objc_call_loads_for_image + 0xc0
16 dyld 0x8fe184b4 call_funcs_for_add_image + 0x8c
17 dyld 0x8fe183ec call_registered_funcs_for_add_images_in_objects + 0x68
18 dyld 0x8fe1830c call_registered_funcs_for_add_images + 0x1c
19 dyld 0x8fe116cc link_in_need_modules + 0x19c
20 dyld 0x8fe1333c _dyld_link_module + 0x234
21 libSystem.B.dylib 0x9003f4a8 NSLinkModule + 0x68
22 libobjc.A.dylib 0x90838068 objc_loadModule + 0x88
23 com.apple.Foundation 0x90a56e74 _NSBundleLoadCode + 0x344
24 com.apple.Foundation 0x90a56800 -[NSBundle load] + 0x134
25 com.apple.Foundation 0x90a6a8b8 -[NSBundle principalClass] + 0x30
26 com.apple.AppKit 0x93084ed0 -[NSInputManager _loadBundle] + 0x80
27 com.apple.AppKit 0x93086060 -[NSInputManager initWithName:host:] + 0x548
28 com.apple.AppKit 0x92eb9234 +[NSInputManager initialize] + 0x398
29 libobjc.A.dylib 0x908329e0 class_initialize + 0x140
30 libobjc.A.dylib 0x90831524 _class_lookupMethodAndLoadCache + 0x84
31 libobjc.A.dylib 0x90831298 objc_msgSend + 0xb8
32 com.apple.AppKit 0x92e8efec -[NSApplication finishLaunching] + 0x84
33 com.apple.AppKit 0x92dfcde4 -[NSApplication run] + 0x74
34 com.apple.AppKit 0x92eb948c NSApplicationMain + 0x1d0
35 com.apple.Safari 0x0000ceec 0x1000 + 0xbeec
36 com.apple.Safari 0x0000cd60 0x1000 + 0xbd60

Thread 1:
0 libSystem.B.dylib 0x900074c8 mach_msg_trap + 0x8
1 libSystem.B.dylib 0x90007018 mach_msg + 0x38
2 com.apple.CoreFoundation 0x90191790 __CFRunLoopRun + 0x350
3 com.apple.CoreFoundation 0x90195f1c CFRunLoopRunSpecific + 0x148
4 com.apple.Foundation 0x909fc850 -[NSRunLoop runMode:beforeDate:] + 0xac
5 com.apple.Foundation 0x90a15454 -[NSRunLoop run] + 0x4c
6 com.apple.WebKit 0x953158bc +[WebFileDatabase _syncLoop:] + 0xa8
7 com.apple.Foundation 0x90a39b74 forkThreadForFunction + 0x6c
8 libSystem.B.dylib 0x900246e8 _pthread_body + 0x28

PPC Thread State:
srr0: 0x908311ec srr1: 0x0200f030 vrsave: 0x00000000
cr: 0x44000244 xer: 0x00000000 lr: 0x005f296c ctr: 0x908311e0
r0: 0x005f296c r1: 0xbfffd690 r2: 0xa00011ac r3: 0xa0830454
r4: 0x00603ce0 r5: 0x00602944 r6: 0x00603850 r7: 0x00000000
r8: 0x00000000 r9: 0x00000008 r10: 0xfefefeff r11: 0x006070e4
r12: 0x00000000 r13: 0xa2df8e9c r14: 0xa2de8e9c r15: 0xa2de8e9c
r16: 0xa2df5b18 r17: 0xa2df5b18 r18: 0x00102ac0 r19: 0x00000000
r20: 0x00000000 r21: 0x00136910 r22: 0xa2df5b18 r23: 0x001162d0
r24: 0x0060afc4 r25: 0x00000009 r26: 0x0060b080 r27: 0x00000006
r28: 0x0060b074 r29: 0x00609be4 r30: 0x00609be4 r31: 0x005f2944
:eek:

Quote:

Originally Posted by woooopa

It was working fine prior to the upgrade. HELP!!!

Woooopa, please start a new thread with this problem. Thanks!

Installed combined update 10.3.5 on a new system - first I used Backup 2 to archive my account stuff, then I booted from my system CD and erased the HD, then I installed 10.3.3 from the CD, then the combined update 10.3.5 as well as all the security and app updates.
When I moved my preferences back into my home directory and then ran each app to test I found that Sherlock's channels were completely missing! I don't know where they are. I've tried deleting the Sherlock preferences, but that didnt bring 'em back. Any idea what I did here and how I can get back the channels w/out re-installing the OS?

G5 DP 2.0Ghz 1Gb RAM
PowerBook Ti G4 867Mgz 1Gb RAM
OS 10.3.5

Vectorworks 9.5.2 has serious issues when producing PDF's of drawings.
Usually crashes and corrupts working file.

The installer cannot find the system. Patching doesn't work, because... they can't find the system. I did a clean install to work around this, but it's worse than before. I even tried unmounting my secondary disk, as I noticed the error always came up when the installer was searching that. Same result, the installer errors, then says it installed successfully, but hangs on launch and patch cannot find install. *sigh*
My determination, to find an adobe competitor. Does somebody want to make a product that WORKS?

I have installed Acrobat 5, not reader under Panther

I have installed Acrobat 5, not reader under Panther, with out issue.

I have to assume there is a trace of a previous install gumming up the works.

You should start a new thread in the software forum so your issuee gets appropriate attention.